Need help?Do you have a question about the Genie H2000C-1 and is the answer not in the manual?
General| Type | Chain Drive |
|---|---|
| Horsepower | 1/2 HP |
| Warranty | Limited lifetime motor warranty |
| Motor Type | DC |
| Remote Controls Included | 1 |
| Battery Backup | No |
| Drive Type | Chain |
| Remote Control | Yes |
| Voltage | 120V |
Details the GCG, PCG, H series and Intellicode remote control system.
Provides phone number and website for customer support and inquiries.
Verifies structural integrity of mounting locations for the power head and header bracket.
Ensures clear space for Safe-T-Beam system brackets on the door frame.
Checks garage door material for bracing needs and confirms 110-120V power availability.
Warns against using extension cords or generators and advises on door balance.
Illustrates key mounting points for sectional garage doors.
Illustrates key mounting points for 1-piece garage doors.
Explains the advanced security system that changes access codes.
Describes available remote controls and wall-mounted operator controls.
Details the safety system that reverses the door upon detecting an obstruction.
Covers Safe-T-Reverse® and Safe-T-Stop® contact and timed reversing features.
Explains adjustable force settings and automatic lighting features for safety.
Identifies main parts like remote controls, wall consoles, and labels.
Details various bolts, nuts, screws, and clips used in assembly.
Provides a visual breakdown of components for 1-piece rail systems.
Provides a visual breakdown of components for 3-piece rail systems.
Lists and illustrates all parts of the pre-assembled power head unit.
Outlines potential dangers associated with garage doors and operators.
Steps for distinguishing and aligning rail components for assembly.
Instructions for securing rail sections together and attaching the rail strap.
Guides on inserting the carriage into the rail and attaching it to the power head.
Steps for attaching the release cord, knob, and tag for manual operation.
Instructions for positioning and securing the open and close limit switches.
Guides on routing and connecting limit switch wires to the power head terminals.
Methods for determining the correct height and position for the header bracket.
Detailed steps for securely fastening the header bracket to the garage framing.
Guides on finding the optimal position and attaching the bracket to the garage door.
Steps for placing and attaching the operator assembly to the ceiling.
Guidance on setting the correct height for the manual emergency release cord.
Instructions for connecting the curved and straight arms for sectional doors.
Instructions for connecting the arms for 1-piece garage doors.
Steps for attaching the Safe-T-Beam® sensor and source brackets.
Guidance on routing and connecting the STB system wires.
Instructions for using staples to fasten STB system wires to the wall.
Details on connecting STB wires to the sensor, source, and power head terminals.
Verifying the correct vertical positioning of the STB system lenses.
Selecting a safe and convenient location for the wall-mounted control.
Connecting the wall control wires and securely fastening it to the wall.
Instructions for connecting via grounded plug or permanent wiring.
How to check STB alignment after powering the unit.
Setting the open and close limits for the garage door's travel.
Adjusting the force required to open and close the door for safety.
Procedure to verify the door reverses upon hitting an obstruction.
Steps to resolve issues if the door does not reverse properly.
Step-by-step guide to program a single-button remote control.
How to use the programmed remote to operate the garage door.
Instructions for programming multi-button remotes for different doors.
Steps to clear memory and reprogram remotes if one is lost or stolen.
Guide for replacing the battery in the remote control.
Instructions for installing the light bulb and lens cover on the operator.
Inspecting door springs and hardware for proper condition and safety.
Checking door balance and ensuring contact reverse functionality.
Guidance on maintaining the Safe-T-Beam® system for safe operation.
Solves problems like operator not running or door not moving from wall control.
Addresses issues with remote range, operation, and Safe-T-Beam® malfunctions.
Lists various remote controls and wall-mounted accessories available.
Details accessories like extension kits, conversion kits, and safety brackets.
Catalog of accessories with product codes, prices, and quantities.
Instructions for ordering, shipping, and payment methods.
Details what is covered, what is not, and warranty duration.
Procedures for getting warranty service and contacting Genie.
To Next Page
