EasyManua.ls Logo

Genie SX-125 XC Service Manual

Genie SX-125 XC
182 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Maintenance Manual
- Booms
This manual includes detailed
procedures for each
maintenance inspection.
For Repair procedures, Fault
Codes, Electrical and Hydraulic
Schematics, refer to the
appropriate Service and Repair
Manual for your machine.
Part No. 1268489GT
Rev G
October 2018

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Genie SX-125 XC and is the answer not in the manual?

Genie SX-125 XC Specifications

General IconGeneral
Power SourceDiesel
Max Working Height131 ft (39.93 m)
Max Platform Height125 ft (38.10 m)
Platform Capacity500 lbs
Horizontal Reach80 ft (24.38 m)
Overall Width8 ft 2 in (2.49 m)
Tire TypeFoam-filled

Summary

Safety Rules

General Safety Rules

Overarching safety warnings and rules for maintenance.

Personal Safety

Awareness of hazards and protective measures for personnel.

Performance Specifications

Function Speeds

Details function speeds for S-100, S-105, S-100HD models.

Drive Speeds

Lists drive speeds for various S and SX models.

Torque Specifications

Hydraulic Specifications

Hydraulic Relief Valve Pressure

Relief valve pressures for various boom lift models.

Maintenance Procedures

Observe and Obey

Essential guidelines for performing maintenance inspections.

Quarterly Maintenance Procedures

Q-2 Battery Inspection

Procedure for inspecting battery condition and specific gravity.

Q-11 Check and Adjust the Engine RPM

Procedure for checking and adjusting engine low and high idle RPM.

Q-20 Confirm the Proper Brake Configuration

Procedure to verify correct brake system setup.

Annual Maintenance Procedures

Programmed Maintenance Procedures

Related product manuals