BRAIN 15
ENGLISH
Guide for the installer
Page 13
Notes on reading the instruction
Read this installation manual to the full before you begin installing the product.
The symbol indicates notes that are important for the safety of persons and for the good condition of the automated system.
The symbol draws your attention to the notes on the characteristics and operation of the product.
INDEX
1. WARNINGS page.13
2. LAYOUT AND CONNECTIONS page.13
3. TECHNICAL SPECIFICATIONS page.14
3.1. Description of components page.14
3.2. Description of terminal-boards page.14
3.3. Anti-crushing function page.14
3.4. Over pushing stroke page.14
4. PROGRAMMING OF THE LOGIC page.14
5. PROGRAMMING THE SPEED page.14
6. START-UP page.15
6.1. Leds check page.15
6.2. Programming the Dips-switch page.15
6.3. Time - setup learning page.15
7.INSTALLATION OF BUS ACCESSORIES page.16
7.1. Addressing the BUS photocells page.16
7.2. Memory storage of BUS accessotries page.17
7.3. Memorising the BUS encoder page.18
8. MEMORY STORING THE RADIO CODE page.18
8.1. Memory storage of - JLC (Amigo-Kilo) radio controls page.18
8.2. Memory storage of 433 RC (Bravo - Echo) radio controls page.18
8.3. Radio controls deletion procedure page.19
9. BATTERY KIT (OPZIONAL) page.19
10. AUTOMATED SYSTEM TEST page.19
11. FUNCTION LOGICS page.20
EU DECLARATION OF CONFORMITY
The Manufacturer
Company name:
FAAC S.p.A. Soc. Unipersonale
Address: Via Calari, 10 - 40069 Zola Predosa BOLOGNA - ITALY
hereby declares under its own exclusive liability that the following product::
Description: Control board
Model: BRAIN 15
complies with the following applicable EU legislations:
2014/30/EU , 2011/65/EU
Furthermore, the following harmonised standards have been applied:
EN61000-6-2:2005 , EN61000-6-3:2007 + A1:2011
Bologna, 01-06-2017 CEO
To Next Page
Loading...
Need help?
General
