English
-18-
● Slide the switch on the battery cover in the direction indicated by the arrow.
● Insert the batteries as indicated on the inner side of the cover.
● Close and lock the battery cover.
NOTE:
Do not open the cover roughly to avoid damaging the battery compartment cover.
¾ If the battery power indicator shows only one black block that means that power
is available, and you can continue to use the flash.
¾ When the battery indicator turns red, you cannot take still and movie pictures any
more.
¾ Any pre-setting date/time value will be retained in the camera's memory for about
3 minutes when replacing the batteries. We still suggest you to double check the
date/time setting after changing new batteries.
5-3 Loading and Removing the Memory Card
z Make sure to turn off the camera.
1. Loading the memory card.
To Next Page
Loading...
