English
-22-
settings. By pressing the button on the center of the MENU/ENTER Button
, the menu items will appears on the LCD monitor. Press the arrow buttons
/
/ / on the MENU/ENTER Button to move and select the desired
menu items.
7. Press the arrow buttons
/ on the MENU/ENTER Button to adjust the
digital zoom and a message about digital zoom will appear on the left side of the
LCD Monitor.
8. Slide down and up the Macro Button on the side of camera to enable the
Macro photography.
After you selected the Macro Mode, the Macro LED located on the top of the LCD
monitor will be green.
※ If the low batteries power icon appears on the LCD Monitor, please change new
batteries immediately to keep the camera operating normally.
※ If the "Memory is not enough!" warning message appears on the LCD monitor, it
means the memory card is full, remove the memory card and insert a new one
immediately.
6-3 Play Mode
In Play Mode, users can review the recorded still and movie pictures. To review the pictures,
perform the following:
1. Turn the Mode Dial
to Play Mode .
2. Using the lens cover located on the front of the camera to turn on the
camera. After you turn on the camera, the last image recorded appears on
the LCD monitor.
3. Press the arrow buttons
/ on the MENU/ENTER Button to
review the previous and back image.
4. Press the
button on the center of the MENU/ENTER Button to
enable the "Delete", "Slideshow" and "DPOF" functions.
5. Press the arrow button
on the MENU/ENTER Button to enter the
selected menu items.
6. Press the arrow button
on the MENU/ENTER Button to exit the
menu.
To Next Page
Loading...
