English
-8-
(9) Time display
(10) Date display
(11) Remaining battery power
(12) Zoom lever
(13) Flash status
(14) Stable Palm: Icon displays in darker environments & requires firm camera
holding for clear shooting.
3-3 Power Supply
●Slide the lens cover toward left gently and turn on the camera after two beeps
sound.
●Slide the lens cover toward right gently and turn off the camera.
●Use the lens cover located on the front of the camera to turn on/off camera. After
you turn on the camera, the red LED will be blinking, and then the last image
recorded appears on the LCD monitor.
※If no operation is carried out for a fixed amount of time (default: about 1 minute),
the power is turned OFF to prevent battery wear. This is called "Auto Power
OFF".
You can press the “Mode Display Button” to restart the camera.
※The following features will automatically save the configuration before turn off
the camera unless you ever selected "Reset Default" to restore its factory
anticipated settings.
1. Resolution
2. Quality
3. OSD Language
4. White Balance
5. EV Compensation
6. TV-Out
To Next Page
Loading...
