Genius HR7XSLIM - Setting Up E-MAIL;WEB Button Functions; Scan to E-mail Function Setup; Scan to Web Function Setup

Genius Scanner
21
To Set Up the " E-MAIL/WEB " Button
“Scan to E-mail” Function
1. Open the “Scan Manager Setting” window by clicking on the Windows START button and
choose PROGRAM, Genius Scanner (the model name of your scanner), KYESCAN.
2. Click the
icon on the bottom right corner of the screen to open the “Scan Manager
Setting” window.
3. Click on the “E-MAIL/WEB” tab in the “Scan Manager Setting” window.
4. Choose “E-mail” as the in the drop-down “Application” menu.
5. Check “Enable” and “Confirm” under “Preview” if you require the system to automatically
generate a preview image before proceeding scan.
6. Adjust or select proper scanning attributes, if necessary.
7. Click on “Close” to complete setting.
“Scan to Web” Function
1. Open the “Scan Manager Setting” window by clicking on the Windows START button and
choose PROGRAM, Genius Scanner (the model name of your scanner), KYESCAN.
2. Click the
icon on the bottom right corner of the screen to open the “Scan Manager
Setting” window.
3. Click on the “E-MAIL/WEB” tab in the “Scan Manager Setting” window.
4. Choose “Page abc” software in the drop-down “Application” menu.
5. Check “Enable” and “Confirm” under “Preview” if you require the system to automatically
generate a preview image before proceeding scan.
6. Adjust or select proper scanning attributes, if necessary.
7. Click on “Close” to complete setting.