Genius Scanner
23
"TEXT/OCT" Button
Please install and set up ABBYY FineReader Sprint 4.0 OCR software before using this function.
To Set Up Editor
1. Open the “Scan Manager Setting” window by clicking on the Windows START button and
choose PROGRAM, Genius Scanner (the model name of your scanner), KYESCAN.
2. Click the
icon on the bottom right corner of the screen to open the “Scan Manager
Setting” window.
3. Click on the “TEXT/OCR” tab in the “Scan Manager Setting” window.
4. Choose a proper word processor in the drop-down “Editor” menu.
5. Check “Enable” and “Confirm” under “Preview” if you require the system to automatically
generate a preview image before proceeding scan.
6. Adjust or select proper scanning attributes for scanning Reflection Object, if necessary.
7. Click on “Close” to complete setting.
To Use the “TEXT/OCT” Button
1. Place a typewritten text document face down on the scanning glass.
2. Press the “TEXT/OCR” Button on the scanner
Note: Skip to step 5, if you did not have “Enable” and “Confirm” checked under
“Preview” in Scan Manager.
To Next Page
Loading...
