The longer side with the tape visible
should face to
the
right. If you hear
nothing or hear just a garbled sound, it
may not be
in
squarely. Press
A
to
remove the tape and start over. Once the
tape
is
playing, use the knobs for
volume and balance, just as you do for
the radio. The lighted arrows show
which side
of
the tape
is
playing.
Your bias is set automatically. When a
metal or chrome tape is inserted,
“MTL”
is shown
on
the display.
Fast Forward
Press
FF
to rapidly advance to another
part
of
the tape. Press
FF,
RCL/PROG
or
A
(Stop/Eject) to return to
playing speed.
Rewind
Press
REW
to rapidly reverse the tape.
Press
REW, RCLlPROG
or
A
(Stop/Eject)
to
return to playing speed.
To
Play the Next Selection
Press
NEXT
to go forward to the
beginning of the next selection.
For
NEXT
to work properly, your tape
must have at least three or four seconds
of silence between each selection.
Previous
Press
PREV
to hear the last selection
over. Press PREV again or press
RCL/PROG
or (Stop/Eject) to
cancel this function.
Program
Press
RCL/PROG
to switch from one
side
of
the tape to the other.
Your cassette tape player can play
continuously because the player has an
auto-reverse feature.
Dolby
DD@
Press
00
to remove noise from
Dolby DD@ NR-encoded tapes.
Dolby@’ Noise Reduction is
manufactured under license from Dolby
Laboratories Licensing Corporation.
Dolby
and the double-D symbol are
trademarks of Dolby Laboratories
Licensing Corporation.
To Next Page
Loading...
