Features
&
Controls
Headlight High/Low Beam
First, you must have the headlights on.
(See “Lights”
in
the Index.) Then, pull
the turn signal lever toward you for low
beams. For high beams, push the lever
away from you. When the high beams
are on, a blue light on the instrument
panel also will be on. It will go off
when you switch
to
low beam.
Passing Signal
With the lever in the low beam position,
pull the lever toward you to
momentarily switch to high beam (to
signal that you are going to pass). When
you release the lever, the headlights will
return to low beam operation.
Daytime Running fights (DM)
lndicator Light (Canada)
If your vehicle was first sold, when
new,
in
Canada, you will have this light
on the instrument panel. It goes on
whenever the Daytime Running Lights
are on.
Daytime Running
f
ights
(Canada)
The Canadian Federal Government has
decided that “Daytime Running Lights”
(DRL) are a useful feature, in that DRL
can make your vehicle more visible to
pedestrians and other drivers during
daylight hours. DRL are required
on
new vehicles sold
in
Canada.
The low beam headlights will come on
at reduced brightness
in
daylight when:
The ignition is
on
The headlight switch is off, and
The parking brake is released.
When you turn on your headlights, the
DRL will switch off and the exterior
lights wil come on. When you turn off
To Next Page
Loading...
Need help?
General
