Features
&
Controls
New Vehicle
“Break-In
’’
Your modern Geo doesn’t need
an
:laborate “break-in.” But it will
perform better in the long
1
1
follow these guideli~
A
m
Ignition
Switch
With the key in
the
ignition switch, you
can turn the switch to four positions:
LOCK
(A):
The
only
position
in
which
you can remove the key. This locks
your steering wheel, ignition and
automatic transmission. Press
in
the
ignition switch as you turn the top of it
toward you.
If you have an automatic transmission,
the ignition switch cannot be turned to
LOCK
unless the shift lever is
in
the
P
(Park) position.
ACC
(B):
Position in which you can
operate your electrical power
accessories. It unlocks the steering
wheel and ignition.
A
warning chime
will sound if you open the driver’s door
when the ignition is
in
ACC
or
LOCK
and the key is in the ignition. Use this
position if your vehicle must be pushed
or towed.
ON
(C):
Position to which the switch
returns after you start your engine and
release the switch. The switch stays in
the
ON
position when
the
engine is
running. But even when the engine is
not running, you can use
ON
to operate
your electrical power accessories, and to
display some instrument panel warning
lights.
START
(D):
Starts the engine. When
the engine starts, release the key. The
ignition switch will return to
ON
for
normal driving.
To Next Page
Loading...
Need help?
General
