Features
&
Controls
Turn Signal and lane Change
lndicator
The turn signal has two upward (for
Right) and two downward (for Left)
positions. These positions allow you to
signal a turn or a lane change.
To
signal a turn, move the lever all the
way
up
or down. When the turn is
finished, the lever will return
automatically.
A
green arrow on the instrument panel
will
flash in the direction
of
the turn or
lane change.
To
signal a lane change, just raise or
lower the lever until the green arrow
starts to flash. Hold
it
there
until
you
complete your lane change. The lever
will return by itself when you release it.
As
you signal a turn or a lane change, if
the arrows don’t flash but just stay on, a
signal bulb may be burned out and other
drivers won’t see your turn signal.
If a bulb is burned out, replace it
to
help
avoid an accident. If the green arrows
don’t go on at all when you signal a
turn, check the fuse (see “Fuses and
Circuit Breakers’’
in
the Index) and for
burned-out bulbs.
To Next Page
Loading...
Need help?
General
