Problems
on
the
Road
5.
Check that the jumper cables don’t
have loose or missing insulation.
If
they do, you could get a shock. The
vehicles could be damaged, too.
Before you connect
the
cables, here
are some things you should
know.
Positive
(+)
will go to positive
(+)
and negative
(-)
will
go
to negative
(-)
or
a
metal engine part. Don’t
connect
(+)
to
(-)
or you’ll get
a
short that would damage
the
battery
and maybe other parts, too.
\
Fans or other moving engine
parts can injure you badly.
-eep your hands away from
moving parts once the engines are
running.
6.
Connect the red positive
(+)
cable to
the positive
(+)
terminal
of
the
vehicle with the dead battery. Use a
remote positive
(+)
terminal if
the
vehicle has one.
To Next Page
Loading...
