4.
Then
fill
the coolant recovery tank to
the
FULL
mark.
5.
Put the cap back on
the
coolant
recovery tank, but leave the radiator
pressure cap
off.
6.
Start the engine and let it run until
you can feel the upper radiator hose
getting
hot.
Watch out for the engine
fan.
By
this time, the coolant level inside
the radiator filler neck may be lower.
If
the level is lower, add more
of
the
proper mix through the filler neck
until the level reaches the base of the
filler neck.
r
To Next Page
Loading...
Need help?
General
