Write down any four-digit number and keep
it
in
a safe
place.
Turn the ignition switch to the
ACC
or
ON
position.
Turn the audio system off.
Press the 1 and
4
buttons together. Hold them down until
(‘----
”
shows on the display.
You are now ready to enter your security code.
Don’t
wait more than 15 seconds between steps.
Press
SEEK
4
b
and/or
TUNE
4
b
and
“0000”
will
appear
on
the display.
Press
SEEK
4
and hold
it
until
the
first digit of your
code appears. Release the button.
Press SEEK and hold
it
until the second digit
of
your
code appears. Release the button.
Press TUNE
4
and hold it until the third digit of your
code appears. Release the button.
Press
TUNE
and hold it
until
the fourth digit
of
your
code appears. Release the button.
Press
AM-FM
after you have checked that the code you
entered is the one you wrote down. “rEP” will appear
on
the display, which means
you
need
to
repeat steps 5
through
9.
Press
AM-FM
again and the display will now show
SEC.
How
to Shut Off the Theft-Deterrent Feature
If
your radio
is
secured
(SEC
shows
on
the display) and
you
wish
to
disable
it,
enter your security code
as
follows,
pausing
no more than
15
seconds between steps.
Press the
1
and
4
buttons together. Hold them down until
SEC
shows on the display. You are now ready to enter
your security code.
Press
the
SEEK
4
button and hold it until the first digit
of your code appears.
Press
the
SEEK
b
button and‘hold it
until
the second
digit of your code appears.
Press the TUNE
4
button and hold it until the third digit
of your code appears.
Press
the
TUNE
b
button and hold it until
the
fourth
digit
of
your code appears.
Press
AM-FM
after you have checked that the code you
entered matches
the
one
you
wrote down.
“----
”
should
now appear
on
the
display. The theft-deterrent feature
is
now shut
off.
If
an incorrect code is entered, Err will appear on the
display. Repeat
the
above procedure.
To Next Page
Loading...
Need help?
General
