EasyManua.ls Logo

Geo Tracker 1995 - Maintenance Schedule T I

Geo Tracker 1995
354 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
I
Maintenance Schedule
TI
I
15,000
Miles
(25
000
km)
0
Change engine oil and filter (or every
7.5
months, whichever occurs first).
An Emission Control
Service.
0
Clean and repack the front wheel bearings
(or at each brake relining, whichever occurs
first).
0
Rotate tires. See “Tire Inspection and
Rotation” in the Index for proper rotation
pattern and additional information.
0
Inspect the loclung front hubs
(if
equipped)
for correct operation (or ever
3
months,
whichever occurs first). Repair or replace if
necessary.
0
Inspect the valve lash and adjust if
necessary.
An Emission Control
Service.
0
Check engine idle speed and adjust it to
underhood label specifications.
An Emission
Control
Service.
0
Inspect propeller shafts and u-joints for
looseness and damage (or every
15
months,
whichever occurs first). Inspect more
frequently if used off-road or for pulling a
trailer. Tighten u-joint flange bolts
if
necessary.
DATE ACTUAL MILEAGE SERVICED
BY:
7-34

Table of Contents

Related product manuals