To
unfold the seat:
Keep your hands, safety belts and other objects away
from where the seat will rest.
1.
Pull the support bar out
of
the floor bracket and
swing it up and toward the bottom of the seat.
2.
Push
and secure the support bar into the bracket
on
the
bottom
of
the seat.
3.
Slowly pull the seat down to the floor. The seat
should latch into place. Pull up on the bottom
of
the
seat to be
sure
it is locked in position.
4.
Pull the seatback
up
and push it back to lock it into
place. Push
and
pull
the
top
of the seatback to be
sure
the
seatback
is
locked in position.
Safety Belts: They’re for Everyone
This part
of
the manual tells you how to use
safety
belts
properly. It also tells you some things you should not do
with safety belts.
To Next Page
Loading...
