To
Unlock
the System After
a
Power
Loss
If power is disrupted to the radio while
in
the SEC
mode, the unit will not work and LOC will show
on the
display whenever the ignition
is
on.
To unlock the unit.
press
4
SEEK
b
or
4
TUNE and
“0000”
will appear
on the display.
Press the
SEEK
4
button and hold it until the first digit
of your code appears.
Press the SEEK button and hold it until the second
digit of your code appears.
Press the
TUNE
4
button and hold it until the third digit
of
your code appears.
Press the TUNE
b
button and hold it until the fourth
digit of your code appears.
Understanding Radio Reception
FM
Stereo
FM stereo
will
give you
the
best sound. But
FM
signals
will reach
only
about
10
to
40
miles (16 to 65 km). And,
tall buildings or hills can interfere with
FM
signals,
causing the sound
to come and
go.
AM
The range for most AM stations is greater than for
FM,
especially at night.
The
longer range, however, can
cause stations to interfere with each other.
AM
can pick
up noise from things like storms and power lines. Try
reducing the treble to reduce this noise if you ever get it.
Press AM-FM after you have checked that the code
matches the one you wrote down. Now
SEC
will appear
on the display.
(If
an incorrect code is entered, Err will
appear on
the
display. Repeat the above procedure.)
To Next Page
Loading...
Need help?
General
