To
Check Brake Fluid
You
can check the brake
fluid without taking off the
cap. Just look at the
windows on the brake fluid
reservoir. The fluid levels
should be above
MIN.
If
they aren’t, have your brake
system checked to see
if
there is
a
leak.
After work is done on the brake hydraulic system, make
sure the levels are above
MIN
and below the top
of
each
window.
What to Add
When
you
do
need brake fluid, use
only
DOT-3
brake
fluid
--
such
as Delco Supreme
1
l@
(GM
Part
No.
1052535).
Use new brake fluid from a sealed
container only, and always clean the brake fluid
reservoir cap before removing it.
I
NOTICE:
Don’t let someone put in the wrong kind of
fluid, For example, just
a
few
drops of
mineral-based oil, such as engine oil, in
your brake system can damage brake
system parts
so
badly that they’ll have to be
replaced.
0
Brake fluid can damage paint,
so
be careful
not to spill brake fluid on your vehicle.
If
you do, wash it
off
immediately. See
“Appearance Care” in the Index.
To Next Page
Loading...
Need help?
General
