Geo Tracker 1995 - Page 288

I Maintenance Schedule I I
0 Inspect the locking front hubs (if equipped)
for correct operation (or ever
3 months,
whichever occurs first). Repair
or replace as
necessary.
0 Inspect propeller shafts and u-joints for
looseness and damage (or every
15 months,
whichever occurs first). Inspect more
frequently if used off-road
or for pulling a
trailer. Tighten u-joint flange bolts if
necessary.
18,000 Miles (30 000 km)
0 Change engine oil and filter (or every
3 months, whichever occurs first).
An Emission Control Service.
Rotate tires. See “Tire Inspection and
Rotation”
in the Index for proper rotation
pattern and additional information.
0 Inspect the locking front hubs (if equipped)
for correct operation (or
every 3 months,
whichever occurs first). Repair or replace if
necessary.
I I I I
DATE ACTUAL MILEAGE SERVICED BY: