Geo Tracker 1995 - Page 295

1 Maintenance Schedule I I
45,000 Miles (75 000 km) (Continued)
[7 Inspect the locking front hubs (if equipped)
for correct operation (or every
3 months, .
whichever occurs first). Repair or replace as
necessary.
0 Inspect propeller shafts and u-joints for
looseness and‘damage (or every
15 months,
whichever occurs first). Inspect more
frequently
if used off-road or for pulling a
trailer. Tighten u-joint flange bolts if
necessary.
48,000 Miles (80 000 km)
0 Change engine oil and filter (or every
3 months, whichever occurs first).
0 Rotate tires. See “Tire Inspection and
Rotation” in the Index for proper rotation
pattern and additional information.
0 Inspect the locking front hubs (if equipped)
for correct operation (or every
3 months,
whichever occurs first). Repair or replace
if
necessary.
An Emission Control Sewice.
DATE ACTUAL MILEAGE SERVICED BY: DATE ACTUAL MILEAGE
SERVICED BY:
7-18