4
L
A
green arrow on the instrument panel will flash in the
direction of the turn or lane change.
To
signal
a
lane change, just raise or lower the lever
until the green arrow starts
to
flash. Hold it there until
you complete your lane change. The lever will return by
itself when you release it.
As
you signal
a
turn
or
a lane change, if the
arrows
don’t
flash but just stay on, a signal bulb may be burned out
and other drivers won’t see your turn signal.
If
a
bulb is burned out, replace it to help avoid an
accident.
If
the green arrows don’t
go
on at all when you
signal
a
turn, check the fuse (see “Fuses and Circuit
Breakers’’ in the Index) and
for
burned-out bulbs.
0
0
Turn the outside part
of
the lever to control the lamps.
There are three positions for the lamp switch.
OFF:
All lamps are off.
0
-loo:
:
The parking lamps, taillamps, license plate
lamp and the instrument panel lighting come on. The
headlamps
are
off.
-:g-
:
The headlamps and all other operating lamps
come on.
To Next Page
Loading...
Need help?
General
