Removing and Installing
Your
Rear Window
The rear window of your vehicle is removable. This
allows you
to
open the back opening all the way or to
replace the window if it becomes deteriorated. To
remove the rear window:
1. Open the rear gate all the way.
2.
Unfasten the canvas flaps at the lower corners of the
rear window to uncover the zipper pull.
3.
Unzip the rear window.
4.
Hang the rear window down
so
it hangs outside
of
the vehicle.
5. Push
the
clip
on
the driver’s side
of
the rear window
frame (see illustration above) and pull the bar
rearward. Then slide the
bar
to the left
to
release
the passenger’s side.
Reverse the steps to install the rear window. Make sure
that the window
is
completely closed before driving.
To Next Page
Loading...
Need help?
General
