GeoMax Zenith16 Series Installation Guide

Zenith16/40 GNSS Series - 16 -
Installation Guide © 2019 GeoMax AG, Widnau Switzerland
4 EQUIPMENT SETUP
4.1 ROVER SETUP
For a RTK rover, the Zenith16/40 equipment can be setup on a pole as shown above.
When working with the UHF radio, ensure the correct frequency and protocol are set as
described in section 3.5. Attach a radio antenna suitable for the set frequency. The following
UHF antennas can be ordered from GeoMax:

GeoMax Zenith16 Series Specifications

General

Brand	GeoMax
Model	Zenith16 Series
Category	Receiver
Language	English