GeoMax Zenith16 Series Installation Guide

Zenith16/40 GNSS Series - 8 -
Installation Guide © 2019 GeoMax AG, Widnau Switzerland
3.4 RECEIVER CONFIGURATION
To configure the receiver either as a base or as a rover using the internal UHF radio or the
internal GPRS, select Configure from the bottom of the configuration panel and the GNSS
configuration window will appear. There it will be possible to configure the Zenith16/40 as
needed.

GeoMax Zenith16 Series Specifications

General

Brand	GeoMax
Model	Zenith16 Series
Category	Receiver
Language	English