Zenith16/40 GNSS Series - 5 -
Installation Guide © 2019 GeoMax AG, Widnau Switzerland
3.2 RECEIVER CONNECTION WITH ZENITH MANAGER
Locate the Zenith Manager software on the Zenith16/40 folder on the GeoMax partner area
and download it to your PC. Run Setup_Zenith_Manager.exe and follow the instructions
of the installer.
Click on the Zenith Manager icon of your desktop to launch it.
To connect to your Zenith16/40, click on the CONNECT button on the top-left side of the
menu bar and choose the preferred connection type, USB (cable) or Bluetooth. To connect
via USB, the receiver must be connected to the PC with the USB cable.
To Next Page
Loading...
Need help?
General
