Need help?Do you have a question about the Geometrics G-882 and is the answer not in the manual?
General| Brand | Geometrics |
|---|---|
| Model | G-882 |
| Category | Marine Equipment |
| Language | English |
Explains the principles of Cesium-vapor atomic resonance magnetometry.
Details how to connect the tow cable to the nose of the fish for towing.
Instructions for changing the tow configuration from nose to center of gravity.
Guidance on adjusting the handle and orientation weight for sensor housing.
Describes how to securely attach the tow cable to the vessel using a Kellems grip.
Steps for connecting power and turning on the magnetometer system.
Overview of the MagLog software's data logging and display capabilities.
Step-by-step guide to initializing the survey setup using the wizard.
Discusses operation with logging software and common user questions.
Details the G-882 magnetometer's output, sensitivity, and accuracy.
Explains how to orient the sensor for optimal performance in different regions.
Maps to determine inclination and total intensity for sensor adjustment.
Describes the data format and commands for the CM-221 counter module.
Introduces optional software like CSAZ, CM201, and calibration tools.
Procedure for calibrating the depth sensor using MagLog software.
Covers the physical assembly, installation, and deployment of the system.
Procedures for deploying the magnetometer system.
Details the various connectors used on the G-882 system.
Provides instructions for maintaining O-rings when re-installing a bulkhead.
Lists the operating pressure ratings for different depth sensors.
Provides specifications for original and new tow cables.
Offers solutions for common operational symptoms and probable causes.
Guide on using the MagLog Diagnostic Survey for system checks.
Instructions for calibrating voltage measurements using CM-221 counters.
To Next Page