Geometrics G-882 User Manual

Geometrics Inc. G-882 Cesium Marine Magnetometer Page
42
Command Format: Description:
----------------- ----------- ----------------------------------
Output Format Byte 1: 'O' select output format
2: x format select:
'A'= ASCII (default)
'E'= excess 3
'P'= packed BCD
'S'= Sandia G822A fmt
x: x '0' = Sandia single Mag
'1' = Sandia dual Mag
3: CR carriage return
[Note: the '0' and '1' 3rd characters are valid only when selecting the
Sandia format]
Julian Clock Format: Byte 1: 'O' select output format
2: J format select:
3: x Day field: '1'= on ; '0' = off
4: x Hour field: '1'= on ; '0' = off
5: x Min field: '1'= on ; '0' = off
6: x Sec field: '1'= on ; '0' = off
7: x 10mS field: '1'= on ; '0' = off
8: x MSB of counter # ('0' or '1')
9: x LSB of counter # ('0' thru '9')
10: CR carriage return
[Note: characters 8 and 9 can be omitted. If this is done the
command
will default to counter 0.]
Julian Time Enable: Byte 1: 'J' Enable/Disable Julian time output
2: x '0' = turn off; '1' = turn on
3: x MS digit of which counter ('0','1')
4: x LS digit of counter # ('0' - '9')
5: CR carriage return
[Note: characters 3 and 4 can be omitted. If
this is done the command will affect all
counters in the chain.]
Set Julian Day: Byte 1: 'D' Set the Julian day number
2: x MS digit of number ('0'-'3')
3: x 2S digit of number ('0'-'9')
4: x LS digit of number ('0'-'9')
5: CR carriage return

Geometrics G-882 Specifications

General

Brand	Geometrics
Model	G-882
Category	Marine Equipment
Language	English