Geonav 10C User Manual

41
English
If an autopilot is connected to the GEONAV, the plotted route
is automatically followed as soon as the Navigation mode is
enabled.
NOTE: The cursor can be moved to the desired position by using the GOTO functions
as well. See the GOTO Section for more details.
The NAVIONICS Gold™ charts provide detailed information
that can be displayed at any time.
By using the joystick, position the cursor on the chart item
desired (symbol for light, buoy, depth area, etc.) and then press
the joystick; the information relative to the items situated in
that given position will be shown.
Use the joystick to scroll the information list, then press EXIT
to exit and select another item. Press EXIT again to go back to
Navigation mode.

Geonav 10C Specifications

General

Brand	Geonav
Model	10C
Category	GPS
Language	English