56
English
To change the active window from 2D to 3D or vice versa,
hold EXIT pressed for a short time. When the 3D window is
active, use the joystick to displace the view point, the ZOOM
key to enlarge or reduce the image and the knob to rotate the
view.
The knob allows also to raise the view point and to change its
angle. Press the knob to switch from one function to another.
After changing the point of view, using either the joystick or
the knob, it is possible to restore the original point of view by
pressing EXIT.
To exit from the 2D/3D split windows, press EXIT and hold it
pressed for a few seconds.
2D/3D Split Windows
To Next Page
Loading...
