65
English
EDITING A ROUTE (NAVIGATION MODE)
If the manual cursor is displayed, press the EXIT key to enter
Navigation mode.
Changing the target waypoint
Use the “Route to a waypoint” function (see the Functions in
the Route Menu Section).
WARNING: The route will be modified and the new target waypoint selected will be
the first waypoint in the route.
Deleting all waypoints
Press the CLR key to show the “DELETE ROUTE? ENTER =
YES” message. Press the ENTER key to confirm the deletion or
another key to exit.
FUNCTIONS IN THE ROUTE MENU
Route Info
Route information is displayed on several adjacent pages con-
taining general route information and the geographical coor-
dinates of all waypoints. Press GOTO to display the main menu,
then select ROUTE, CURRENT and GOTO WP. A window
will show the following information:
WP NAME: Waypoint name
DISTANCE: Distance from START to current waypoint
TIME: Estimated time from START to current waypoint
FUEL LITERS: Estimated fuel consumption (liters or gallons)
BRG: Bearing from previous waypoint to current waypoint
POSITION: Waypoint latitude / longitude
To Next Page
Loading...
