Geonav 11C - Page 67

67
English
A message will confirm that the route has been stored cor-
rectly. Once stored, the route will disappear from the screen.
Recalling a route from the CompactFlash™
Press the GOTO key to display the menu, select ROUTE, OLD
and press ENTER to open the route catalog; select the route by
the joystick and then press ENTER to confirm, or EXIT to exit.
The route recalled will be displayed, the Autozoom function
automatically enabled and a window will allow selecting the
target waypoint.
Deleting a route
To delete the route displayed, press the GOTO key to show the
menu, select ROUTE, CURRENT, DELETE and press ENTER to
confirm.
To delete a route stored in the CompactFlash™, press the GOTO
key to show the menu, then select ROUTE and OLD.
Select the route from the list of the routes stored in the
CompactFlash™, then press CLR to delete it and ENTER to con-
firm the operation.
Reversing a route
Press the GOTO key to display the menu, select ROUTE, CUR-
RENT and then REVERSE.
The waypoint order will be automatically reversed allowing
navigation in the opposite direction.
Route to a waypoint
Press the GOTO key, select ROUTE, CURRENT, GOTO WP and
move the cursor within the waypoint list by using the joy-
stick. Press ENTER and select the target waypoint by the joy-
stick. Press ENTER to confirm the selection, or EXIT to exit.
As the GEONAV plots a new route, the waypoint selected be-
comes the first waypoint in the route, whereas previous
waypoints are deleted.