71
English
The GEONAV will position the manual cursor at the begin-
ning of the track segment selected; insert a waypoint by press-
ing ENTER, or a marker by holding ENTER pressed.
Setting the track density
Press the GOTO key and select TRACK, CURRENT, TRACK
DENSITY by the joystick. A window will allow setting the
trackpoint saving density by time interval, distance or auto-
matically.
Automatic track
When no track has been manually enabled by the user, the
Automatic track function will allow keeping the record of the
route anyway.
The automatic track is active provided that no track has been
previously set by the user and is displayed in a different color
so as to distinguish it from the user’s track.
To save the automatic track, press GOTO, select TRACK, CUR-
RENT and SAVE ALL. To change the default file name, use
the joystick.
NOTE: The symbol identifying the track starting point will not be shown in case of
automatic track.
To Next Page
Loading...
