Quick Start Guide
GV-Video Server
© 2012 GeoVision Inc. All rights reserved.
Thank you for purchasing GV-Video Server (GV-VS04H / VS11 / VS12 / VS14). This guide
is designed to assist the new user in getting immediate results from the GV-VS04H / VS11 /
VS12 / VS14. For advanced information on how to use the GV-VS04H / VS11 / VS12 /
VS14, please refer to GV-Video Server User's Manual on Software CD/DVD.
1
Introduction
Welcome to the GV-Video Server Quick Start Guide. In the following
sections, you will learn about the basic installations and configurations of the
GV-Video Server (GV-VS04H / VS11 / VS12 / VS14). For a detailed user’s
manual, see GV-Video Server User’s Manual on the GV-Video Server
software CD/DVD.
Packing List
2012/09
English
VS04111214-QG-A
● DC Male-to-Male Cable x 1
● Power Adaptor x 1
● Wall Hook x 1
GV-VS04H / GV-VS14
● 3.5 mm Stereo to RCA Cable x 2
● AC Power Cord x 1
● Conical Anchor x 4
● Screw x 4
● GV-Video Server Software
CD/DVD x 1
● GV-NVR Software CD/DVD x 1
Note: The DC Male-to-Male Cable is
used to power on the camera through
the GV-Video Server. You can also
optionally purchase three more DC
Male-to-Male Cables and one DC
1-Male to 4-Female Cable to power on
four cameras through the GV-Video
Server.
DC 1-Male to
4-Female Cable
DC Male-to-Male
Cable
To Next Page
Need help?
General
