34
EN
Preparation for use
AC adapter
Use the device only with a medical approved stabi-
lized AC adapter (input: 230 V, AC, 50 Hz; output:
6 V, DC, 1 A).
Note:
1. No batteries are required during operation using
the AC adapter.
2. If AC adapter power is interrupted during meas-
urement, the unit must be reset by disconnecting
the AC adapter from the unit.
3. Only use medical approved adapters that com-
ply with the specifi cations in this manual. Using
other adapters could cause damage your blood
pressure monitor.
Posture during measurement
1. Sit upright and ensure that the measuring site is at
heart level. Relax and retain a natural posture during
measurement.
2. Measure and record blood pressure at the same time
every day to establish your blood pressure pattern.
To Next Page
Loading...
