40
EN
Error messages
Replace batteries: Replace all 4 batteries
with new ones. Insert the batteries in correct
polarities.
EE
Appears when measurement error oc-
curs or blood pressure value is displayed
excessively low or high: Measure again.
Wrap the cuff correctly and keep the arm still
during measurement.
E1
Air circuit deviation. Cuff tube may not be
plugged into monitor correctly: Check cuff
connection. Measure again.
E2
Pressure exceeds 300 mmHg: Turn the unit
off to clear, then measure again.
E3
Measurement data that result in an
error message: Measure again.
EP
Return the device to your local distributor
or to Geratherm.
To Next Page
Loading...
