The InteliGen module contains the following three menu screens:
- Measurement
- Adjustment
- History
To display the different instruments on each screen menu, press (17) and (16).
T
he measurement screen displays the parameters measured by the engine; if the engine uses an electronic
management system, many additional parameters can be displayed. In addition to these parameters, measurements
can be displayed for fuel level, oil pressure, current, voltage, frequency, run hours and battery charge level.
The adjustment menu screen displays the adjustment parameters already configured; it is not necessary to edit any
of these
.
The history screen menu displays the log of alarms that have occurred in the generator unit. It also logs the opening
and closing of the mains circuit breaker as well as the starting and shutting down of the generator unit
.
Page
Can be selected using the following button (18).
To Next Page
Loading...