25
GB
4.5 Maintenance
Maintenance of the blind rivet setting tool is limited to the replacement of worn threaded
mandrels and nosepieces as and when necessary (for information on replacing the threaded
mandrels, see Section 3.1).
Regular maintenance will extend the service life of your high-quality GESIPA
®
tools
and they should be serviced at least every 2 years by an authorised workshop or by
GESIPA
®
Service. For tools that are used intensively, we recommend servicing ahead of
schedule.
4.6 Repairs
Repairs under warranty are carried out by the manufacturer. Repairs outside the warranty pe-
riod should only be carried out by skilled technical personnel. Failure to observe the assembly
and setting procedures and operation by non-skilled personnel may result in serious damage
to the blind rivet nut setting tool. In case of doubt, always send in the blind rivet nut setting tool
to the supplier or to GESIPA
®
.
5. Charger and battery
5.1 Technical data
5.1.1 Battery charger
Input voltage: 100-240 V~ / 50-60 Hz
Output voltage: 21 VDC
Output current: 2.5 A
Weight: 0.6 kg
5.1.2 Battery
Nominal voltage: 18.0 V
Number of cells: 5
Cell / capacity: Li-Ion; 2.1 Ah
Weight: Approx. 0.42 kg
To Next Page
Loading...
