GK-7PLUS CONTROLLER INSTRUCTION MANUAL
17
3.2.5.1.5 Supervisor Mode Supervisor / SUPERVISOR MENU / CONFIGURATION / ETHERNET
(only in kits with ETHERNET connection)
This option allows the parameter configuration that take part in the ETHERNET connection and the later
communication of information with the DieselPlus application.
IP ADDRESS: IP address assigned to the GK-7PLUS controller in the local network given by the
network administrator.
NETMASK: It determines the local network scope given by the network administrator.
GATEWAY: IP address of the link gate given by the network administrator.
SERVER: Domain or IP address of DieselPlus used for the communications with the GK-7PLUS
controller given by DieselPlus.
LOCAL PORT: Listening port number of the GK-7PLUS given by DieselPlus.
REMOTE PORT: Listening port number of the DieselPlus application given by DieselPlus.
DNS1: Preferred DNS Server.
DNS2: Alternative DNS Server
The values of the SERVER, LOCAL AND REMOTE PORT only can be modified from the DieselPlus
application.
3.2.5.2. SUPERVISOR mode / SUPERVISOR MENU / DATE/HOUR
This option allows adjusting the clock of real time that the kit has. Selecting it, the display shows:
DATE
CURRENT 08/04/2013
NEW / /
In this point, type the correct date and then <OK>. The used format is DDMMYYYY. If the shown date is
correct, it is possible to keep it pressing the key <OK> directly. If it is typed an incorrect date, the system will
not modify the current date although it will not inform about this fact.
Once completed the date regularization, the kit will show the following message:
HOUR
CURRENT 13:06:43
NEW : :
In this point the correct hour will be typed followed by the key <OK>. The used format is HHMMSS. If the
shown hour is correct, it is possible to keep it pressing the key <OK> directly. If it is typed an incorrect hour,
the system will not modify the current hour although it will not inform about this fact.
To Next Page
Loading...