GK-7PLUS CONTROLLER INSTRUCTION MANUAL
20
Appendix A · Factory controller configuration
The configuration by defect is that the kit has (approx.) when it goes out from the factory or after an
initialization. This configuration is the following one:
CONSOLE CONFIGURATION:
User identification: PIN
Vehicle identification: Numeric code
Predetermination: Not enabled
Supervisor identify.: 000000000000
PIN Supervisor: 0220
Product number: 1
Tank number: 1
Hose number: 1
LCD heading: GK-7 CONTROLLER
Language: Spanish
Printer: Not enabled
L1 Printer: GK-7 CONTROLLER
L2 Printer:
L3 Printer:
L4 Printer:
L5 Printer:
Ticket requ. Seconds: 60
Address: 1
Hiding 300 ml YES
TAX decimals 0
Price decimals 3
Total decimals 2
Hose selector NO
Free field UNABLED
Free field mask NUMERICAL
Free field Text1
Free field Text2
TANK 1
Product PRODUCT 1
PRODUCT 1:
Name: PRODUCT
Sale price: 0.000
Tax: 0
HOSE CONFIGURATION
HOSE 1
Tank: 1
Resolution: 1/100
Generator type: 2 channels at 9º
Divisor Factor: approx. 500
(1)
Factor Protection: Not protected
Seconds w/o pulses: 90
Maximum amount: 1000
Maximum time: 600
(1) This value can be changed depending on its calibration from factory.
To Next Page
Loading...