GK-7PLUS CONTROLLER INSTRUCTION MANUAL
9
If it is necessary to start a new identification before the described time passes, the user will have to pass
the identifier or press a key, depending on the configured identification mode.
Step 7. Supply ticket
If the kit is connected to a ticket printer, it is possible to print a supply ticket similar to the model shown
below.
The way to print this ticket depends on the value of the parameter 'ticket edition' in the definition of the user
that has made the service.
If it is defined as ‘Yes’, the user will not have to make any action, and the kit will automatically print the
ticket.
If it is defined ‘by request’, the user will be able to choose to print or not to print the ticket.
- If he wants to print the ticket, he will have a determined time to pass again the identification key or
type his PIN code, depending on the identification mode, and ask for the ticket printing.
The value, in seconds, of this time is that configured in the parameter ‘ticket request seconds’.
If the user lets this time pass and he is identified again, the kit will understand that he wants to start a
new identification.
Finally, if the user is defined with the parameter ‘ticket edition' as 'No', the user will not be able to print
the ticket.
COMPANY NAME
Address
Town
NIF
07/05/2013 11:09:55
NUMBER: 5564
USER: 345
VEHICLE: 233
KILOMETRES: 122334
PRODUCT: DIESEL A
QUANTITY: 34.02
PRICE: 0,850
TOTAL: 28.92
THANK YOU VERY MUCH
This shown ticket model is the complete ticket. The edited data will depend on the system configuration.
So, i.e., the first and last lines are free texts; the kilometre line will or will not be shown depending on
whether the vehicle has or has not activated the consumption control; or the lines related with the amount
will be only shown if the price per litre or the volume unit with which is working has a different value of zero.
To Next Page
Loading...