1. GENERAL INFORMATION
1.1 NOTE OF INSTALLATION
To make sure a saf e a n d c o r r e c t operation, please check below conditions before
install the machine:
1) Power source capacity must be equal of the machine need.
2) Machine standard power is 110v/220v (+- 10%)
3) Machine standard power Hertz is 50/60 Hz. (+- 2%)
4) Machine is workable under the temperature between O ℃ - 45℃
5) Make sure the wire is tidy on the ground.
6) There should not have vibration beside the machine during the installment, and
make sure the ground is flat.
7) Read and follow the instruction of the installment.
To Next Page
Loading...
