Using BIOS Setup 5-7
Advanced Menu
The Advanced menu contains the advanced settings as shown next.
Any key Wake Up from S3 allows the system to wake-up from Sleep
mode by pressing the power button ( ) or any keys. When set at Disable
only the power button can wake-up the system from Sleep mode.
CD/DVD Auto Power Control allows you to enable the optical drive’s
automatic power control when using battery power.
NIC Auto Power Control allows you to enable the NIC’s (network
interface controller) automatic power control when using battery power.
SATA HDD Mode when set at Compatible and connecting a SATA
(serial ATA) hard drive is set as Primary on SATA controller in Legacy
mode. When connecting a PATA (parallel ATA) hard drive is set as
Secondary on SATA controller in Legacy mode.
When set at Enhance and connecting a SATA hard drive is set as Primary
on SATA controller in Native mode. When connecting a PATA hard
drive is set as Primary on PATA controller in Legacy mode.
To Next Page
Loading...
Need help?
General
