Getac X600 - Turning On and Off the Computer

3
Turning On and Off the Computer
Turning On
1. Open the top cover by pulling the cover latch and lifting up the cover.
You can tilt the cover forward or backward for optimal viewing clarity.
2. Press the power button ( ). The Windows operating system should
start.
Turning Off
When you finish a working session, you can stop the system by turning off
the power or leaving it in Sleep or Hibernation mode:
To... Do this...
Power off
(Shutdown)
Select Start  Power  Shut down.
Sleep Use one of these methods:
 Press the power button.*
 Close the top cover.*
 Press Fn + F12.*
 Select Start  Power  Sleep.
Hibernate
By default, this option is not shown in the Start menu. If you
want to use the feature, set up accordingly in Windows
settings.
* “Sleep” is the default result of the action. You can change what the
action does through Windows settings.