GETINGE-LA CALHENE ISOTEST | User manual
NTA
3015/78 C
Approuvé informatiquement / Electronic signature
DEX | Page 21/
Glove storage
− Avoid natural or artificial light.
− Store them in a dry location with temperatures comprised between 16 and 25 ° C.
− Avoid compression stress due to excessive stacking.
Washing and disinfection
Pay close attention when performing these operations. Wash the gloves with distilled
water and then blow dry them at a low temperature.
Disinfection must be performed using a method and products that will not damage the
materials (isopropyl alcohol or another disinfectant product).
Avoid extended exposure to high temperatures. The use of halogenous products is
forbidden, especially in concentrated form (chloroform, bleach, etc.)
Note: This list is not exhaustive, and it is always preferable to perform a test on one glove before
beginning general application of any new method or product.
Glove replacement frequency will be determined according to their use and the frequency with
which the isolator is sterilized.
Manipulation inside the isolator is done through glove-sleeve assemblies. The neoprene
gloves are available in different sizes. The sleeves are made from Hypalon® or PVC /
PVC-coated polyester.
CAUTION
Before starting operations, it is compulsory to remove any
objects that might damage the glove: watch, rings, etc.
Getinge-La Calhène also recommends wearing under-
gloves (for hygiene) and over-gloves, which must be
replaced frequently (to reduce cross-contamination).
Soudure
Number
Designation
1 Gloves
2 R48 O-ring
3 Equipped cuff ring
4 Sleeve
5 R77 O-ring
6 Shoulder ring
To Next Page
Loading...