Getinge ISOTEST - Process Alarms

GETINGE-LA CALHENE ISOTEST | User manual
NTA 3015/78 C
Approuvé informatiquement / Electronic signature
DEX | Page 51/
74
8.6. PROCESS ALARMS
− Any error occurring during a cycle is displayed in the alarm view and must be
acknowledged.
Alarm status:
– A alarm appearing (in red).
– (A) D alarm disappearing and acknowledged (in green).
Deletes all the alarms in the memory (access level >= Maintenance).
Note: Please consult the technical manual for the list of alarms and corrective actions.
1
1