Getinge ISOTEST - Page 31

GETINGE-LA CALHENE ISOTEST | User manual
NTA 3015/78 C
Approuvé informatiquement / Electronic signature
DEX | Page 31/
74
− Press the "Not ready" button and the following window appears.
− All the locking parameters must be set to "YES" in order to begin the cycle.
Yes -> Condition met
No -> Condition missing
− Press the enter key to return to the user view.
Note
: Correct the missing condition and then restart the process from step 1.
Step 3: − The cycle starts in test phase