GETINGE-LA CALHENE ISOTEST | User manual
NTA
3015/78 C
Approuvé informatiquement / Electronic signature
DEX | Page 36/
Step 9: − The airlock door is closed. The airlock is in loading phase.
The airlock is not sterile.
The following animation appears:
When the load is inserted, the operator can close the airlock door.
Step 10: − The airlock door is closed. The airlock is in loading phase.
The airlock is not sterile. The operator can still open the airlock door (if opened,
the animation in step 6 is displayed).
The following animation appears (if there is a transition before starting
biodecontamination in manual mode; in the case of "auto" selection,
biodecontamination starts automatically after closing the door):
To Next Page
Loading...