Getinge Maquet SERVO-i Service Manual

7
7 - 4 Service Manual Revision 02
Preventive maintenance Servo-i Ventilator System
B. Replace plastic nozzle units in the gas modules.
After replacement of plastic nozzle units, wait 10
minutes before connecting pressure to the gas
modules.
Inspiratory pressure transducer filter
C. Replace the filter for the inspiratory pressure
transducer. Make sure that the filter is correctly
seated into the rubber ring.
Refer to instructions in the 'Servo-i Ventilator
System – User's manual', chapter 'Maintenance'.
Note: This filter may already be replaced as a part of
the 'Extended cleaning of Inspiratory channel'
performed in combination with the Preventive
maintenance.
Bacteria filter for O
2
cell
D. Replace the bacteria filter for the O
2
cell.
Refer to instructions in the 'Servo-i Ventilator
System – User's manual', chapter 'Maintenance'.
D
SVX9070
C
SVX9069
SVX9068
B

Getinge Maquet SERVO-i Specifications

General

Brand	Getinge
Model	Maquet SERVO-i
Category	Medical Equipment
Language	English