What to do if the red indicator is flashing on Getinge Medical Equipment?
If the red indicator is flashing on your Getinge Medical Equipment, replace the backup supply batteries. This should resolve the issue.
Why is the orange indicator on Getinge Medical Equipment?
If the orange indicator is on, on Getinge Medical Equipment, it could be due to a faulty configuration, such as a defective board or communication fault, or the backup battery level may be too low. Check the configuration and ensure the backup battery level is adequate to resolve this issue.
General| Type | Surgical Light |
|---|---|
| Light Source | LED |
| Illuminance | 160, 000 lux |
| Adjustable Light Field Size | Yes |
| Focusable Light Field Diameter | Yes |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Sterilization | Sterilizable handle |
| Dimensions | Varies by configuration |
| Warranty | 2 years |
| Number of LEDs | Varies depending on model |
| LED Life Expectancy | 60, 000 hours |
| Control | Wall-mounted control panel |
| Color Temperature | 3500 - 5000 K (adjustable) |
| Color Rendering Index (CRI/Ra) | >95 |
Information on manual purpose, company, and liability clauses.
Details on abbreviations, symbols, definitions, and product packaging symbols.
Description of the system, its components, options, accessories, and identification label.
Information on applied standards, intended use, indications, users, and clinical benefits.
Specifies environmental conditions for transport, storage, and use.
Covers safe use, electrical, optical, infection precautions, and warning labels.
Description of buttons and functions on the lighthead's control keypad.
Details of controls on the wall-mounted keypad and the touchscreen interface.
Procedures for daily checks, installing/removing devices, and handling components.
Instructions for operating lights, adjusting illumination, and using special modes.
Guidance on camera control, screen holder positioning, and camera mount operations.
Configuring screen brightness, date/time, and managing backup battery tests.
Explanation of various indicators on keypads and screens indicating device status.
Table of common anomalies, likely causes, and corrective actions for device issues.
Guidelines and precautions for cleaning and disinfecting the device and its parts.
Detailed procedures for manual cleaning, washer-disinfector use, and sterilisation of handles.
Procedures for monthly visual and functional inspections, including battery tests.
Summary of maintenance steps and intervals over the product lifetime.
Detailed optical data for lightheads, including illumination and color rendering.
Specifications related to lighthead mass, dimensions, power supply, and screen holders.
Details on input voltage, power, LED counts, service life, and battery charge times.
Technical specifications for the OHDII FHD QL+ VP01 and OHDII 4K QL+ VP11 cameras.
Instructions for environmentally friendly disposal and recycling of packaging materials.
Guidelines for disposing of the product and its electrical/electronic components.
To Next Page
